If you want to change your led colors from the default patterns on your MM3 you can do this by loading your firmware “marlin” file into arduino and navigate to the bottom of the configuration.h file. Instructions and examples are located at the bottom of this file.
Maker’s Tool Works support guru Flint started out as one of our customers. He purchased one of our MendelMax 2 printers during our beta for his very first printer. He was also in our internal beta for our new MM3 and he liked it so much, he decided to upgrade his MM2 also. Not wanting […]
Products in the categories ‘Printers & Kits’ and ‘Extruders & Parts’ are 10% off
All Other products are 20% off!
All discounts are applied automatically and will be reflected in your shopping cart. Pricing will be in effect until 12/1. Orders will be shipped on a first-come, first-served basis, and depending on sales volume orders may end […]
Click play to watch the video. It will blow your mind.
It’s been awhile since we’ve been able to get a new blog post up. But don’t think we’ve been sitting around on our laurels. Our Oklahoma factory has been busy supporting you and your hobby. We’ve learned that just like us, you are passionate […]
This was sent to use from a recent client (OhmEye in the IRC chatroom) . This is the full untouched, unredacted review. This put a smile on our face.
I have thousands of print hours using my MendelMax 1.5 and 2.0 printers and the 3.0 design carries forward this design family that make it seem more […]
Maker’s Tool Works, in conjunction with Sproutform.com is excited to announce our new file sharing site, share.makerstoolworks.com. You can download files from others, including all the STLs for teh MendelMax 2 and Fusematic, upload your own CAD files and STLs, search for files, etc. We really would like to see this become the de facto […]
We’ve been asked a few times now if we were being reviewed in this years Make Magazine 3d Printer Shootout. We are not, and I wanted to explain why. Last Year, we were very excited to be included in the review. I was a charter subscriber to Make, and credit them with a lot of […]
Long time customers of ours know that we always strive to keep our prices as low as possible. We don’t often offer additional discounts, our margins just don’t allow it.
But for a limited time, you can now save $100 on our MendelMax 2 or an additional $50 on our Fusematic printers. We also have clearance […]
Maker’s Tool Works will be attending the Midwest Rerap Festival in Goshen, IN on March 14-16. Admission to the 3D printing festival is free, stop by and say hi!
We will also be hosting a special Fusematic build workshop. We will be there to help you out as you build. We are offering a special Fusematic […]